by GF Lasers | Mar 19, 2021 | Blog
Shown here is a preformed panel, measuring roughly 2.5 metres in length that has been processed on our Trumpf 7040 3.2Kw Trumpf five axis laser machine. We maximised the machine’s cutting angle capability to remove a precise section of material to make way for glazing...
by GF Lasers | Feb 11, 2021 | Blog
shown in this image is a freshly completed batch of processed form tube. Done on our latest investment in Trumpf fibre technology and the first 5030 4kw fibre laser cell in the country, these parts are destined for use on a very well known brand in the yellow goods...
by GF Lasers | Feb 1, 2021 | Blog
shown here is a precision laser cut part from 10mm thick 6082 aluminium! Produced on our state of the art Trumpf 4kw L49 fibre laser using Nitrogen cutting gas from prime sheet material, the finish straight from machine seen here is something that with older...
by GF Lasers | Jan 31, 2021 | Blog
Most of us in manufacturing and laser cutting will remember 2008 as being a torrid time, I can recall a number of our customers shutting their doors for good and those that remained reduced their requirements dramatically or worked a four day week. Most of us didn’t...
by GF Lasers | Nov 30, 2020 | Blog
we have a selection of parts fresh off our latest investment, a Trumpf 5030 Fibre five axis laser machine. At time of install this cutting edge machine was the very first in the UK. Bringing increased capability and the latest in technologies to ensure only the very...
by GF Lasers | Aug 11, 2020 | Blog
Here pictured we have the final highly visible look of Oxygen laser cut 20mm thick mild steel parts produced on our 3030 Fibre 4kw Trumpf laser machine. As these have been processed under the additional ‘Brightline’ settings and nozzle designs on our state of the art...
