Examples of Laser Cutting Projects In September October 10, 2018 GFLasers Blog, Laser Cutting 0 148 Share on twitter aluminium laser cuttingLaser Cutting in UKlaser cutting services This image shows our customers free issue box section lengths banded and ready for collection. Each 1540mm long length is fixed directly onto the cutting table of our 7040 production 5 axis laser to have the 3 slots cut in. These sections are then used in the reinforcement of super energy efficient doors and windows in both domestic, and commercial environments. This image shows one of our five axis fixtures. These are all designed from our customer cad model, then laser cut on one of our flatbed machines, before being assembled and welded in house. This actual fixture has been designed to enable the cutting of 5 sections of tube within a single cutting cycle. Vastly decreasing production of large batches. This image is of a new updated version of an existing blank. To increase formability and strength, the material used is a ‘boron steel.’ We have produced a relatively small batch of the initially for our customer to develop to ensure that the final part, which would be a major structural piece in vehicles globally, is fit for the intended function and exceeds all safety levels. This image shows a large panel, measuring roughly 2metres in length by 1 metre in width. These are free issued to us in the final pressed form. On our 7040 split cabin 5 axis laser trim the excess material from the outside edge. We then proceed to include all fixing holes and slots, before finally removing the centre section to create an external panel for the public transport sector. To reduce overall waste we later cut the required stiffening ribs from the removed centre section. The fixture has been designed in such a manner that it is usable for each and every stage of the 5 axis laser cutting of these panels which also vary in overall size. This pictorial illustrates the smooth ‘Tongue tested’ cut we are able to achieve direct from the laser cutting of 15mm S355 mild steel. These actual parts, which have been oxygen cut on our 3030 3.2kw CO2 laser machine will later become the base plate of a welded assembly within the yellow goods sector. This image shows parts which have been nitrogen cut on one of our current three Trumpf flatbed laser cutting machines. Cut from pre galvanised material measuring 5 millimetres in thickness, each part is produced using our customer supplied CAD files. This ensure that, once on site, they simply bolt together accurately without modification. This enables the erection of industrial buildings in the quickest and most cost effective manner, whilst ensuring strength and safety is never compromised.