Mild steel laser cutting is perhaps one of the most widely used applications of laser cutting. With the ability to cut from 0.5mm up to 20mm we can turn around your mild steel requirements in hours.

LASER CUTTING MILD STEEL

We can also supply you with full traceability for your mild steel laser cutting requirements. This includes all certificates of conformity from the mill right through to Charpy testing when required. Our internal systems are all approved to ISO 9001:2008 and EN 1090 (CE Marked) to give added assurance that we can meet your quality requirements.

We usually cut mild steel using oxygen but can also use nitrogen if required. Furthermore, we offer a descaling service which is typically used on thicker materials to aid paint adhesion to laser cut edges.

Mild steel laser cutting is carried out on our fibre lasers as well as our CO2 lasers giving customers a range of options. As with all of our metal laser cutting we offer a wide range of ancillary services such as folding and painting.

 

MILD STEEL LASER CUTTING AT A GLANCE

 

Maximum cutting dimensions:4000mm x 2000mm
Minimum cutting thickness:0.5mm
Maximum cutting thickness (Laser):20mm
Lead Time:24 hour turnaround available, please confirm at point of order
Tolerances:+/- 0.25mm as standard.+/- 0.1mm with prior technical approval
Grades:S275
CR4
S355
XF350
Durbar / Chequer plate
Cor-ten
Armoured plate
Cutting Gas:Oxygen & Nitrogen
Secondary Operations:Folding, painting, drilling and tapping
Quality:Approved to ISO 9001:2008 and EN1090 (CE Marked)
Sectors:Automotive
Aerospace
Marine
Yellow Goods
Construction / Architectural
General Engineering
Fabrications
Enclosures

 

Save

Back to Services