GALVANISED MILD STEEL LASER CUTTING
We are one of the UK’s largest suppliers of laser cut pre galvanised mild steel. We typically cut thicknesses from 0.8mm to 5mm.
Galvanised mild steel is extremely popular as it can be a cheaper option than other corrosion resistant metal.
The use of galvanised mild steel is widely used in the construction industry for structural bracketry, plates and drainage equipment. Our approval to EN 1090 CE Marking is especially important to the construction industry where it is a legal requirement for laser cut parts to be fully traceable under the CE marking legislation.
We can also arranged for mild steel parts to be galvanised post laser cutting if specified. This is usually an option when material require galvanising that are over 5mm thick.
GALVANISED MILD STEEL LASER CUTTING AT A GLANCE
|Maximum cutting dimensions:||4000mm x 2000mm|
|Minimum cutting thickness:||0.8mm|
|Maximum cutting thickness (Laser):||5mm|
|Lead Time:||24 hour turnaround available, please confirm at point of order|
|Tolerances:||+/- 0.25mm as standard.+/- 0.1mm with prior technical approval.|
|Secondary Operations:||Folding, drilling and tapping|
|Quality:||Approved to ISO 9001:2008 and EN1090 (CE Marked)|